2010 Nissan Pathfinder Owner's Manual - Page 331
2010 Nissan Pathfinder Manual
Page 331 highlights
WARNING Apply the parking brake if the shift selector is in any position while the engine is not running. Failure to do so could cause the vehicle to move unexpectedly or roll away and result in serious personal injury or property damage. If the ignition switch is turned to the OFF or ACC position for any reason while the vehicle is in N (Neutral), or any D (Drive) position, the ignition switch cannot be turned to the LOCK position and the key (if so equipped) cannot be removed from the ignition switch. Move the shift selector to the P (Park) position, then the ignition switch can be turned to LOCK. P (Park): parking brake first, then move the shift selector into the P (Park) position. R (Reverse): CAUTION To prevent transmission damage, use the P (Park) or R (Reverse) position only when the vehicle is completely stopped. Use the R (Reverse) position to back up. Make sure the vehicle is completely stopped before selecting the R (Reverse) position. The brake pedal must be depressed to move the shift selector from P (Park), N (Neutral) or any drive position to R (Reverse). N (Neutral): Neither forward nor reverse gear is engaged. The engine can be started in this position. You may shift to N (Neutral) and restart a stalled engine while the vehicle is moving. D (Drive): Use this position for all normal forward driving. 3 (Third gear) Type A only: Use this position for driving up and down long slopes where engine braking would be advantageous. WSD0213 Type B To move the shift selector: : Push the button while depressing the brake pedal : Push the button to shift : Shift without depressing brake pedal or pushing the button CAUTION To prevent transmission damage, use the P (Park) or R (Reverse) position only when the vehicle is completely stopped. Use the P (Park) shift selector position when the vehicle is parked or when starting the engine. Make sure the vehicle is completely stopped. The brake pedal should be depressed to move the shift selector from N (Neutral) or any drive position to P (Park). Apply the parking brake. When parking on a hill, apply the Shifting After starting the engine, fully depress the brake pedal and move the shift selector out of the P (Park) position while pressing the button. Starting and driving 5-15