2011 Nissan Murano Owner's Manual - Page 109

or When the headlight switch is in the position while the ignition switch is in the ON position, the lights will automatically turn off 5 minutes after the ignition switch has been pushed to the OFF position. When the headlight switch remains in the or position after the lights automatically turn off, the lights will turn on when the ignition switch is pushed to the ON position. operate with the headlight switch in the OFF position. Turn the position or in the position for full headlight switch to the illumination when driving at night. If the parking brake is applied before the engine is started, the daytime running lights do not illuminate. The daytime running lights illuminate once the parking brake is released. The daytime running lights will remain on until the ignition switch is pushed to the OFF position. CAUTION . SIC3670 Headlight beam select 1 * 2 * To select the low beam, put the lever in the neutral position as shown. To select the high beam, push the lever forward while the switch is in the position. Pull it back to select the low beam. Pulling the lever toward you will flash the headlight high beam even when the headlight switch is in the OFF position. When you turn on the headlight switch again after the lights automatically turn off, the lights will not turn off automatically. Be sure to turn the light switch to the OFF position when you leave the vehicle for extended periods of time, otherwise the battery will be discharged. Never leave the light switch on when the engine is not running for extended periods of time even if the headlights turn off automatically. WARNING When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others. . 3 * Battery saver system A chime will sound when the driver side door is or opened with the light switch in the position and the ignition switch in the ACC, OFF or LOCK position. Daytime running light system (Canada only) The daytime running lights automatically illuminate when the engine is started with the parking brake released. The daytime running lights Instruments and controls 2-35