2011 Nissan Murano Owner's Manual - Page 149

Switching procedure: 1 2 Push the LOCK * and UNLOCK * buttons simultaneously for more than 2 seconds to switch the mode from one to the other. BATTERY SAVER SYSTEM When all the following conditions are met for 60 minutes, the battery saver system will cut off the power supply to prevent battery discharge...The ignition switch is in the ACC position, and All doors are closed, and The selector lever is in the P (Park) position. When pushing the buttons to set the hazard indicator mode, the hazard indicator flashes 3 times. When pushing the buttons to set the hazard indicator and horn mode, the hazard indicator flashes once and the horn chirps once. WARNING SIGNALS To help prevent the vehicle from moving unexpectedly by erroneous operation of the Intelligent Key listed on the following chart or to help prevent the vehicle from being stolen, chime or beep sounds inside and outside the vehicle and a warning displays in the dot matrix liquid crystal display. When a chime or beep sounds or the warning displays, be sure to check the vehicle and Intelligent Key. See "TROUBLESHOOTING GUIDE" later in this section and "DOT MATRIX LIQUID CRYSTAL DISPLAY" in the "2. Instruments and controls" section. Pre-driving checks and adjustments 3-13