2011 Nissan Murano Owner's Manual - Page 142
2011 Nissan Murano Manual
Page 142 highlights
switch to the unlock position 2 *. Lockout protection When the power door lock switch (driver or front passenger) is moved to the lock position with the Intelligent Key in the port and any door open, all doors will lock and unlock automatically. With the Intelligent Key left in the vehicle (not in the Intelligent Key port) and any door open, all doors will unlock automatically and a chime will sound after the door is closed. These functions help to prevent the Intelligent Key from being accidentally locked inside the vehicle. 3. Within 20 seconds of performing Step 2, push and hold the power door lock switch to position (UNLOCK) for more than 5 the seconds. 4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once. 5. The ignition switch must be placed in the OFF and ON position again between each setting change. When the automatic door unlock system is deactivated, the doors do not unlock when the ignition switch is placed in the OFF position. To unlock the door manually, use the inside lock knob or the power door lock switch (driver's or front passenger's side). SPA2300 LOCKING WITH POWER DOOR LOCK SWITCH Operating the power door lock switch will lock or unlock all the doors. The switches are located on the driver's and front passenger's door armrests. To lock the doors, push the power door lock 1 switch to the lock position * with the driver's or front passenger's door open, then close the door. When locking the door this way, be certain not to leave the Intelligent Key inside the vehicle. To unlock the doors, push the power door lock AUTOMATIC DOOR LOCKS . All doors will be locked automatically when the vehicle speed reaches 15 MPH (24 km/h). All doors will be unlocked automatically when the ignition switch is placed in the OFF position. . The automatic unlock function can be deactivated or activated. To deactivate or activate the automatic door unlock system, perform the following procedure: 1. Close all doors. 2. Place the ignition switch in the ON position. 3-6 Pre-driving checks and adjustments