2011 Nissan Murano Owner's Manual - Page 152

1 * LOCK button 2 * UNLOCK button 3 * Power lift gate button 4 * PANIC button Unlocking doors (if so equipped) 1. Push the UNLOCK button * 2 once. To stop opening, release the UNLOCK 2 button * . Windows cannot be closed using the button on the Intelligent Key. If the window open operation is stopped in midoperation while pushing the UNLOCK 2 button * , release and push the UNLOCK 2 button * again until the window opens completely. The door windows can be opened or closed by turning the mechanical key in a door lock. (See "DOORS" earlier in this section.) HOW TO USE REMOTE KEYLESS ENTRY SYSTEM When you lock or unlock the doors or the lift gate, the hazard indicator will flash and the horn (or the outside chime) will sound as a confirmation. For details, see "Setting hazard indicator and horn mode" later in this section. 2. The hazard indicator flashes once. The driver's door will unlock. 3. Push the UNLOCK within 1 minute. button 2 * again 4. The hazard indicator flashes once again. All the doors and the lift gate will unlock. All doors will be locked automatically unless one of the following operations is performed within 1 minute after pushing the UNLOCK button 2 * while the doors are locked. If during this 1button minute time period, the UNLOCK 2 * is pushed, all doors will be locked automatically after another 1 minute...Opening any door (including the lift gate) Pushing the ignition switch Locking doors 1. Move the selector lever to the P (Park) position and push the ignition switch to the OFF position. Make sure you carry the Intelligent Key with you.*1 2. Close all the doors and lift gate.*2 3. Push the LOCK button 1 *. Opening/closing lift gate (if so equipped) 1. Push the power lift gate for more than 1 second. button 3 * 2. The lift gate will automatically open. The hazard indicator flashes 4 times and the outside chime sounds for approximately 3 seconds. To close the lift gate, push the power lift gate 3 button * . The lift gate will automatically close. 3 If the power lift gate button * is pushed while the lift gate is being opened or closed, the lift gate will reverse. 4. All the doors and the lift gate will lock. 5. The hazard indicator flashes twice and the horn chirps once. *1: Doors will lock while the ignition switch is in the ACC or ON position. *2: Doors will not lock while any door is open. Opening windows 2 The UNLOCK button * operation also allows you to open the window that is equipped with the automatic open/close function. (See "POWER WINDOWS" in the "2. Instruments and controls" section). To open the windows, push the door UNLOCK 2 button * for about 3 seconds after the door is unlocked. The power lift gate 3 button * cannot be 3-16 Pre-driving checks and adjustments