2011 Nissan Murano Owner's Manual - Page 313
2011 Nissan Murano Manual
Page 313 highlights
The ignition lock is designed so that the ignition switch position cannot be switched to LOCK until the selector lever is moved to the P (Park) position. When the ignition switch cannot be pushed toward the LOCK position, proceed as follows: 1. Move the selector lever into the P (Park) position. 2. Push the ignition switch to the OFF position. (The ignition switch position indicator will not illuminate.) SSD1021 PUSH-BUTTON IGNITION SWITCH POSITIONS LOCK (Normal parking position) The ignition switch can only be locked in this position. The ignition switch will be unlocked when it is pushed to the ACC position while carrying the Intelligent Key or with the Intelligent Key inserted in the Intelligent Key port. ACC (Accessories) This position activates electrical accessories such as the radio, when the engine is not running. 3. Open the door. The ignition switch will change to the LOCK position. The selector lever can be moved from the P (Park) position if the ignition switch is in the ON position and the brake pedal is depressed. If the battery of the vehicle is discharged, the push-button ignition switch cannot be turned from the LOCK position. Some indicators and warnings for operation are displayed on the dot matrix liquid crystal display between the speedometer and tachometer. (See "DOT MATRIX LIQUID CRYSTAL DISPLAY" in the "2. Instruments and controls" section.) PUSH-BUTTON IGNITION SWITCH OPERATION When the ignition switch is pushed without depressing the brake pedal, the ignition switch position will change as follows: ...Push center once to change to ACC. Push center two times to change to ON. Push center three times to change to OFF. (No position illuminates.) Push center four times to return to ACC. Open or close any door to return to LOCK during the OFF position. ON (Normal operating position) This position turns on the ignition system and electrical accessories. OFF The engine can be turned off without locking the steering wheel. The ignition lock is designed so that the ignition switch cannot be switched to the LOCK position until the selector lever is moved to the P (Park) position. Starting and driving 5-11
![](/manual_guide/autos/2011-nissan-murano-owners-manual-6082db2/313.png)