2014 Nissan Sentra Owner's Manual - Page 189

DISP (display) button: Press the DISP (display) button while a CD is playing to change the text shown in the audio display as follows: For CDs: Running Time → Album Title: → Artist Name: → Song Title For MP3 CDs: Running Time → Folder Title: → Album Title: → Artist Name: → Song Title: If the text information is too long to fully be displayed on the screen; press and hold the DISP button for longer than 1.5 seconds to scroll through the rest of the text. Press the DISP (display) button while the radio is playing to toggle the audio display between station number and RDS. Clock operation To turn the clock display on or off, press the MENU button repeatedly until "Clock" appears on the display. Turn the TUNE/FOLDER knob to toggle the setting (ON or OFF). Clock set 1. Press the MENU button repeatedly until "Adjust Clock" appears on the display. 2. Press the ENTER button. 3. "Change Hour" will appear on the screen. Turn the TUNE/FOLDER knob to adjust the hours and then press ENTER. 4. "Change Minute" will appear on the screen. Turn the TUNE/FOLDER knob to adjust the minutes and then press ENTER. The display will return to the regular clock display after 10 seconds if no further adjustment is performed. The FM stereo indicator (ST) illuminates during FM stereo reception. When the stereo broadcast signal is weak, the radio automatically changes from stereo to monaural reception. SEEK and TRACK (tuning) buttons: Press the SEEK button to tune from low to high frequencies and stop at the next broadcasting station. to tune from high Press the TRACK button to low frequencies and stop at the next broadcasting station. Press and hold either button to seek at a faster speed. SCAN (tuning) button: Press the SCAN button. SCAN illuminates in the display window. Scan tuning begins from low to high frequencies. Scan tuning stops for 5 seconds at each broadcasting station that has sufficient signal strength. When scanning, SCAN blinks in the display. Pressing the SCAN button again during this 5 second period stops scan tuning and the radio remains tuned to that station. FM/AM radio operation AM and FM buttons: Press the AM button to change the band to AM. If another audio source is playing when the AM button is pressed, the audio source playing will automatically be turned off and the last radio station played will begin playing. Press the FM button to change the band as follows: FM1 → FM2 → FM1 If another audio source is playing when the FM button is pressed, the audio source playing will automatically be turned off and the last radio station played will begin playing. 4-38 Monitor, climate, audio, phone and voice recognition systems