2004 Pontiac Aztek Owner's Manual - Page 125
2004 Pontiac Aztek Manual
Page 125 highlights
Replacing the Sliding Rear Convenience Tray The floor track assembly must be installed first for the sliding rear convenience tray to stay locked into place. See "Replacing the Floor Track Assembly" listed previously for more information. 1. Pick up the tray by the handle and support the tray from the bottom with your other hand. 2. Place the tray onto the floor track assembly. Make sure that the two front axles are placed over the hooks on the rear of the floor track assembly. There are four axles on the bottom of the tray, two in front and two in back. Make sure the rollers on the bottom of the tray are located in the tracks of the floor track assembly. 3. Roll the tray forward into the vehicle until you hear a click. 4. Press the release lever and pull the tray onto the tailgate. Connect the hook to the tethered ring located on each side of the sliding rear convenience tray. 5. Push the release lever and roll the tray back into the vehicle. You will hear a click when the tray is locked into position. 2-47