2005 Saab 9-5 Owner's Manual - Page 246

244 Car care and technical information 5 Turn on the low beam headlights and place a piece of cardboard or equivalent (although not directly on the lens) in front of the headlight not being aimed. This should allow the beam cut-off of the headlight being aimed to be seen on the flat surface. NOTICE Do not cover a headlight directly on the lens to improve beam cut-off when aiming. Covering a headlight may cause excessive heat build-up which may cause damage to the headlight. 6 Turn the vertical aiming screw until the horizontal cut-off of the headlight is aligned with the horizontal line on the wall. Horizontal line on wall or other flat surface Correctly adjusted low beam IB1951 IB1952 Vertical aiming device Aiming marker on headlight lens IB1953 IB1954