2010 Subaru Forester Owner's Manual - Page 349
2010 Subaru Forester Manual
Page 349 highlights
Maintenance and service 11-51 3. Remove the bulb socket from the rear combination light assembly by turning it counterclockwise. 4. Pull the bulb out of the bulb socket and replace it with a new one. 5. Set the bulb socket into the rear combination light assembly and turn it clockwise until it locks. 2. Remove the cover and lens. 3. Pull the bulb out of the socket. Install a new bulb. 4. Reinstall the lens and cover. 5. Tighten the mounting screws. & Dome light, map light, cargo area light and door step light CAUTION When the door is opened, the map light illuminates and becomes very hot. When replacing the map light bulb, close the door and be careful not to burn yourself. 7. Tighten the upper and lower screws. & License plate light 6. Put the rear combination light assembly into place while aligning the clip with the guide on the vehicle. 1. Remove the mounting screws using a Phillips screwdriver. Dome light (type A) - CONTINUED -