3Com 3CDSG10PWR User Guide - Page 164
Defining CoS, To con CoS Settings
UPC - 662705520902
View all 3Com 3CDSG10PWR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
164 CHAPTER 13: CONFIGURING QUALITY OF SERVICE Defining CoS The CoS Setup Page contains information for enabling QoS globally. Monitor users have no access to this page. To configure CoS Settings: 1 Click Device > QoS > CoS Setup. The CoS Setup Page opens: Figure 78 CoS Setup Page The CoS Setup Page contains the following fields: ■ QoS Mode - Specifies if QoS is enabled on the device. The possible values are: ■ Disable - Disables QoS on the device. ■ Enable - Enables QoS on the device. ■ Select Port(s) - Selects the ports to be configured. ■ Set Default - Sets the default user priority. The possible field values are 0-7, where 0 is the lowest and 7 is the highest priority. ■ Restore Default - Restores the device factory defaults for CoS values. 2 Define the fields. 3 Click updated. . CoS is configured on the device, and the device is