3Com 3CDSG10PWR User Guide - Page 211
Monitoring > Cable Diagnostics > Diagnostics, Select a Port, Test Result, Cable Fault Distance
UPC - 662705520902
View all 3Com 3CDSG10PWR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
Viewing Cable Diagnostics 211 To test cables: 1 Click Monitoring > Cable Diagnostics > Diagnostics. The Diagnostics Page opens: Figure 104 Diagnostics Page The Diagnostics Page contains the following fields: ■ Select a Port - Selects the port to be tested. ■ Test Result - Displays the cable test results. Possible values are: ■ No Cable - Indicates that a cable is not connected to the port, or the cable is connected on only one side or the cable is shorter than 1 meter. ■ Short Cable - Indicates that a short has occurred in the cable. ■ OK - Indicates that the cable passed the test. ■ Cable Fault Distance - Indicates the distance in meters from the port where the cable error occurred. A Cable Fault Distance of 0M can result from a short (< 1 meter) cable, an open cable or a 2-pair copper cable. ■ Last Update - Indicates the last time the port was tested. 2 Select a port to be tested. 3 Click . The ports are tested, and the page is updated.