Acer AR380 F1 User Manual - Page 135
Specific problems and corrective actions
View all Acer AR380 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
117 Specific problems and corrective actions Listed below are specific problems that may arise during the use of your server and their possible solutions. Power indicator does not light. Do the following: • Make sure the power supply module is properly installed. • Make sure the power cord is connected correctly. • Make sure that the wall outlet has power. Test it by plugging in another device. • Make sure the power indicator on the front panel is lit up green. • Remove all add-in cards and see if the system boots. If reboot is successful, install the cards back in one at a time with a reboot between each addition to determine if one of them is causing the problem. • Make sure that you have properly installed system compliant memory modules, and that they are populated according to the system guidelines. • Make sure that you have installed system compliant processors, and that they are populated according to the system guidelines. HDD activity indicator does not light. Do the following: • Make sure the drive is not disabled in the BIOS setup utility. • Make sure the drive is compatible. • Make sure you have not exceeded the power budget for the server. Hard drives are not recognized. Do the following: • Make sure the disk controller is not disabled in the BIOS setup. • Make sure the drive is compatible.