Acer AR380 F1 User Manual - Page 84
Introduction, The BIOS setup utility, Changing configuration data - f2
View all Acer AR380 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
66 4 System Bios Introduction This chapter describes the BIOS Setup Utility for your server. The AMI ROM BIOS is stored in a Flash EEPROM and can be easily updated. This chapter describes the basic navigation of the BIOS Setup Utility setup screens. The BIOS setup utility To enter the BIOS Setup Utility, press the key while the system is booting up. Each main BIOS menu option is described in this manual. The Main BIOS setup menu screen has two main frames. The left frame displays all the options that can be configured. Grayed-out options cannot be configured. Options in blue can be configured by you. The right frame displays the key legend. Above the key legend is an area reserved for a text message. When an option is selected in the left frame, it is highlighted in white. Often a text message will accompany it. Note: The BIOS has default text messages built in. Acer retains the option to include, omit or change any of these text messages. The BIOS setup utility uses a key-based navigation system called hotkeys. Most of the BIOS setup utility hotkeys can be used at any time during the setup navigation process. These keys include , , , and arrow keys. Changing configuration data The configuration data that determines the system parameters may be changed by entering the BIOS setup utility. This setup utility can be accessed by pressing at the appropriate time during system boot. Starting the setup utility normally, the only visible Power-On Self-Test (POST) routine is the memory test. As the memory is being tested, press the key to enter the BIOS setup utility main menu. From the main menu, you can access the other setup screens. A BIOS identification string is displayed at the left bottom corner of the screen below the copyright message.