Acer AR380 F1 User Manual - Page 96

78 4 System Bios Patrol Scrubbing: A memory error-correction scheme that works in the background looking for and correcting resident errors. Throttling - Closed Loop/Throttling - Open Loop: Throttling improves reliability and reduces power in the processor by automatic voltage control during processor idle states. If Enabled, the following items will appear: • Hysteresis Temperature (For Closed Loop only) - Temperature Hysteresis is the temperature lag (in degrees Celsius) after the set DIMM temperature threshold is reached before Closed Loop Throttling begins. • Guardband Temperature (For the Closed Loop only) - This is the temperature which applies to the DIMM temperature threshold. Steps are in 0.5 °C increments. The default is [006]. Press "+" or "-" on your keyboard to change this value. • Inlet Temperature - This is the temperature detected at the chassis inlet. Steps are in 0.5 °C increments. The default is [070]. Press "+" or "-" on your keyboard to change this value. • Temperature Rise - This is the temperature rise to the DIMM thermal zone. Steps are in 0.5 °C increments. The default is [020]. Press "+" or "-" on your keyboard to change this value. • Air Flow - This is the air flow speed to the DIMM modules. Each step is one mm/sec. The default is [1500]. Press "+" or "-" on your keyboard to change this value. • Altitude - This feature defines how many meters above or below sea level the system is located. • DIMM Pitch - This is the physical space between each DIMM module. Each step is 1/1000 of an inch. The default is [400]. Press "+" or "-" on your keyboard to change this value.