Acer B247YC Lifecycle Extension Guide - Page 12

ACER B247Y 12 S1-2 Assemble the MAIN board and power board. Picture 1 Put the SHD on the worktable. Insert P/BD wire to the Power BD and Locate the Power BD into the SHD as the picture 1. Insert FFC LVDS to the I/F BD as picture 2. Insert the wire on the P/BD to the I/F BD. Locate the I/F BD into the SHD and lock 5 screws as the picture 3 and Put Mylar on P/BD. Picture 2 Picture 3 P/BD IF/BD 5 4 IF/BD P/BD 2 1 S2 Assemble the MF and panel PICTURE 1 Take the Panel on the sponge cushion. Insert the little connector of the lamp wire to panel as the picture 1, thread the lamp wire out of the hole of the MF. Assemble the MF onto the panel. Lock 9 screws to the MF as the picture as the picture 2. Insert the FFC wire to the Panel as the picture 3. Assemble the SHD on the MF as the picture 4. PICTURE 2 PICTURE 3 PICTURE 4 S3 Assemble the ASSY TRIM PICTURE 1 Assemble FFC LED to the PCBA LED BD as the picture 1. Assemble the PCBA LED BD into the ASSY TRIM. Assemble the ASSY TRIM on the MF and lock two MD screws to the ASSY TRIM as the picture 3 PICTURE 2 PICTURE 3 LED BD LED BD