Acer B247YC Lifecycle Extension Guide - Page 13

ACER B247Y 13 S4 Assemble the lamp wire PICTURE 1 Insert the big connector of the lamp wire to the P/BD .Stick 1 piece BOPP tape to fasten the lamp wire as the picture 1. Affix a Mylar on the left hole of the SHD as the picture 2. Tear off the four gums on the FFC LED. Stick the FFC LED on regular mark wire on the SHD as the picture 3. Insert the FFC LED into the I/F BD PICTURE 2 PICTURE 3 S5 Assemble the Ctrl PCBA on RC. PICTURE 1 Assemble FFC Ctrl to the Ctrl PCBA as picture 1. Assemble Control BD to the RC. Tear off the gums on the FFC Ctrl and stick the FFC Ctrl on the RC. Stick 1 piece adhesive tape on the point of inflexion of the FFC Ctrl as picture 2. PICTURE 2 Control BD Control BD S6 Stick a gasket on the back of panel as picture 1. Assemble USB-FFC to the USB SIDE BD as picture 2. Assemble the USB SIDE BD on MF. (This step is only for SKU with USB) Assemble the USB-BD on the MF. Lock one screw to the USB SIDE BD. Tear off the gum of the USB-FFC and insert the USB-FFC another end into the USB-BD. Stick USB-FFC on the panel as picture 3. Affix a Mylar on the right hole of the SHD as picture 4. PICTURE 1 PICTURE 2 PICTURE 3 PICTURE 4 GASKET USB SIDE BD USB SIDE BD USB SIDE BD