Acer Liquid MT S120 S120 Gingerbread User Manual - Page 11
Installing the battery, SIM card lock, Installing or removing the battery
View all Acer Liquid MT S120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installing the battery Slide the battery cover down and lift up. Place the battery into the battery compartment, lining up the battery connectors with those at the top of the compartment. Align the tabs on the battery cover and carefully slide the battery cover until it clicks into place. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. CAUTION: DO NOT INSERT THE BATTERY VERTICALLY INTO THE COMPARTMENT AS IT MAY DAMAGE THE CONTACTS. Charging the battery For initial use, you need to charge your smartphone for eight hours. After that you can recharge the battery as needed. Connect the AC adapter cord to the micro USB connector on your smartphone. You can also charge your smartphone from a USB port on your PC. Please refer to "Acer USB Fast Charge" on page 42 for further details. Removing the battery Open the battery compartment as shown in "Installing the battery". Lift the battery out of the compartment using the tab on the top of the battery. Replace the battery cover as described above. 1 2 SIM card lock Your smartphone may come with a SIM card lock, i.e., you will only be able to use the SIM card provided by your network operator. To cancel the SIM lock, contact your network provider. Installing or removing the battery 11