Adaptec ULTRA160 Installation Guide - Page 14

J, other devices are - scsi card

Page 14 highlights

Installation Guide J STEP 2 Plug one end of the cable to the 50-pin internal SE Narrow SCSI connector on the Adaptec SCSI Card 29160. 50-pin Internal Narrow SCSI Connector STEP 3 50-pin Internal Ultra Narrow SCSI Cable Plug the other end of the cable to a terminated Ultra/Fast Narrow SCSI device. Terminated SCSI Device STEP 4 If you have other Ultra/Fast Narrow SCSI devices, attach them to the connectors between the two ends of the cable. Be sure these other devices are un-terminated. Un-terminated SCSI Device Terminated SCSI Device 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

14
Installation Guide
J
Plug one end of the cable to the 50-pin internal SE Narrow SCSI
connector on the Adaptec SCSI Card 29160.
Plug the other end of the cable to a terminated Ultra/Fast Narrow
SCSI device.
If you have other Ultra/Fast Narrow SCSI devices, attach them to
the connectors between the two ends of the cable. Be sure these
other devices are
un-terminated
.
S
TEP
2
50-pin Internal
Ultra Narrow SCSI Cable
50-pin Internal Narrow
SCSI Connector
S
TEP
3
Terminated SCSI Device
S
TEP
4
Un-terminated SCSI Device
Terminated SCSI Device