Adaptec ULTRA160 Installation Guide - Page 3
Introduction, Adaptec SCSI Card 29160 - hard drive
UPC - 760884155196
View all Adaptec ULTRA160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Adaptec SCSI Card 29160 INTRODUCTION The Adaptec SCSI Card 29160 Ultra160 SCSI controller enables you to connect up to 15 SCSI devices-such as hard disk drives, scanners, and CD-ROM drives-to any Intel-based computer with 32-bit or 64-bit PCI expansion slots. You can connect newer LVD SCSI devices (includes Ultra160 and Ultra2) to the two 68-pin Low Voltage Differential/Single-Ended (LVD/SE) connectors. You can also connect legacy SCSI devices to the 68-pin and 50-pin internal Single-Ended (SE) connectors. 68-pin Internal LVD/SE Connector 68-pin Internal SE Connector 68-pin External LVD/SE Connector 50-pin Internal SE Connector Although the Adaptec SCSI Card 29160 is a 64-bit PCI card, it also works in a 32-bit PCI slot. When installed in a 32-bit PCI slot, the card automatically runs in the slower 32-bit mode. This installation guide explains how to • Install the Adaptec SCSI Card 29160 • Set up SCSI devices • Connect SCSI devices 3