Adaptec ULTRA160 Installation Guide - Page 16
Terminate the Ends, An LVD terminator must be used for LVD SCSI devices - cable
UPC - 760884155196
View all Adaptec ULTRA160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Installation Guide STEP 2 Connect the other end of the external SCSI cable to a SCSI connector on the back of an external SCSI device. SCSI Terminator 4 4 If you are installing only one external device, terminate the device and skip to Step 4. NOTE An LVD terminator must be used for LVD SCSI devices to ensure optimum performance. See Terminate the Ends on page 7 for more information. STEP 3 Connect other external devices by cabling each device to the previous one, as shown below. Terminate only the device at the end of the chain. Un-terminated Terminated 16
16
Installation Guide
Connect the other end of the external SCSI cable to a SCSI
connector on the back of an external SCSI device.
If you are installing only one external device, terminate the device
and skip to Step 4.
Connect other external devices by cabling each device to the pre-
vious one, as shown below. Terminate only the device at the end
of the chain.
S
TEP
2
An LVD terminator must be used for LVD SCSI devices
to ensure optimum performance. See
Terminate the Ends
on
page 7 for more information.
4
4
SCSI Terminator
N
OTE
S
TEP
3
Terminated
Un-terminated