Airlink AICAP650 User Manual - Page 29

Security Setting

Get Airlink AICAP650 PDF manuals and user guides View all Airlink AICAP650 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

7.6.2 Security Setting The Security Setting page provides three sub-menus: Sensor setting, Schedule setting, and Access time setting. Sensor Setting This sub-menu allows you to assign the time period for the camera to take the selected action(s) when motion is detected. Sensor setting: Select Enable/Disable to enable/disable the camera's sensor feature. When you enable this feature, the Use below operation times check box must be selected so that the settings in Operation time 1/2 can be applied. Otherwise, the camera will keep detecting motion. Operation time 1/2: If the camera's motion sensor is enabled, these two options allow you to assign the operational time frame for the sensor. If you want to have the camera constantly detect motion, leave these two options blank. Action: Select the camera's response when motion is detected: Buzzer, Email, FTP, Flash the light, and Save image to USB disk. Click Setup to save the settings. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
29
7.6.2 Security Setting
The
Security Setting
page provides three sub-menus: Sensor setting, Schedule setting,
and Access time setting.
Sensor Setting
This sub-menu allows you to assign the time period for the camera to take the selected
action(s) when motion is detected.
Sensor setting:
Select
Enable
/
Disable
to enable/disable the camera’s sensor feature.
When you enable this feature, the
Use below operation times
check box must be
selected so that the settings in
Operation time 1/2
can be applied. Otherwise, the
camera will keep detecting motion.
Operation time 1/2:
If the camera’s motion sensor is enabled, these two options allow
you to assign the operational time frame for the sensor. If you want to have the camera
constantly detect motion, leave these two options blank.
Action:
Select the camera’s response when motion is detected:
Buzzer
,
Email
,
FTP
,
Flash the light
, and
Save image to USB disk
.
Click
Setup
to save the settings.