Airlink APO1000 User Manual - Page 18
Panel Function Descriptions
View all Airlink APO1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
2.1.2 Panel Function Descriptions ¾ APO1000 Front Panel Rear Panel 1. Reset Button : System reboot button press until LED flashed and release for system reboot or for reset to factory default press, LED flashes keep pressing until LED becomes static 2. Power : 3. Signal Strength : 4. Signal Strength : 5. Signal Strength : 6. WLAN : Red LED ON indicates power on, and OFF indicates power off Yellow LED ON indicates Low Signal (CPE Mode) Green LED ON indicates Normal Signal (CPE Mode) or (WDS Mode only) Green LED ON indicates High Signal (CPE Mode) or (AP Mode only) Green LED BLINKING indicates Wireless ON, and BLINKING quickly indicates Wireless Transmit quickly. 7. Ethernet : 8. PoE Connector : 9. N-Type Connector : Green LED ON indicates connection, OFF indicates no connection For connecting to PSE For connecting to N-Type antenna In CPE Mode, the LED 3 ON indicates the signal Low ( Signal