Airlink APO1000 User Manual - Page 92
Access Point Association
View all Airlink APO1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
5.2 Access Point Association 5.2.1 Wireless General Setup The administrator can change the data transmission, channel and output power settings for the system. Please click on Wireless -> General Setup and follow the below setting. ESSID : Assign Service Set ID for the wireless system. Band Mode : Select an appropriate wireless band; bands available are 801.11b, 802.11g and 802.11b+802.11g. Transmit Rate Control : Select the desired rate from the drop-down list; the options are auto or ranging from 1 to 54Mbps for 802.11g and 802.11b/g modes, or 1 to 11Mbps for 802.11b mode. Country : Select the desired Country code from the drop-down list; the options are US, ETSI or Japan. Channel : The channel range will be changed by selecting different country code. The channel range from 1 to 11 for US country code, or 1 to 13 for ETSI country code, or 1 to 14 for JP country code. Tx Power : You can adjust the output power of the system to get the appropriate coverage for your wireless network. Select the LEVEL 1 to LEVEL 9 you needed for your environment. If you are not sure of which setting to choose, then keep the default setting, LEVEL 9. Security Type : Select the desired security type from the drop-down list; the options are Disabled WEP, WPA-PSK and WPA2-PSK. Î Disable : Data are unencrypted during transmission when this option is selected. Î WEP : Wired Equivalent Privacy(WEP) is a data encryption mechanism based on a 64-bit, 128-bit or 152-bit shared 87