Airlink APO1000 User Manual - Page 87
Clone MAC Address
View all Airlink APO1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Î User Name : Enter User Name for PPPoE connection Î Password : Enter Password for PPPoE connection Î Reconnect Mode : 9 Always on - A connection to Internet is always maintained. 9 On Demand - A connection to Internet is made as needed. When Time Server is enabled at the "On Demand" mode, the "Reconnect Mode" will turn out "Always on". 9 Manual - Click the "Connect" button on "WAN Information" in the Overview page to connect to the Internet. Î Idle Time : Time to last before disconnecting PPPoE session when it is idle. Enter preferred Idle Time in minutes. Î MTU : By default, it's 1492 bytes. MTU stands for Maximum Transmission Unit. Consult with WISP for a correct MTU setting. DNS : Check "No Default DNS Server" or "Specify DNS Server IP" radial button as desired to set up system DNS. Î Primary : The IP address of the primary DNS server. Î Secondary : The IP address of the secondary DNS server. MAC Clone : The MAC address is a 12-digit HEX code uniquely assigned to hardware as identification. Some ISPs require you to register a MAC address in order to access to Internet. If not, you could use default MAC or clone MAC from a PC. Default MAC Address : Keep the default MAC address of WAN port on the system. Î Keep Î Clone MAC Address : If you want to clone the MAC address of the PC, then click the Clone MAC Address button. The system will automatically detect your PC's MAC address. 82