Alpine INE-W940 Owner's Manual - Audio (english) - Page 15
Turning the System On, Inserting/Ejecting a Disc, Inserting the Disc, Removing the Disc - parts
View all Alpine INE-W940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Turning the System On With the Alpine system, when the ignition key is turned to ACC or ON, the opening screen will be automatically displayed. 1 When the system is used for the first time, the language selection menu is displayed. There are 24 languages to choose from. Touch [ ] or [ ] to scroll the list, and then touch the desired language. • You can also scroll through lists by touching the screen and sliding your finger up and down. 2 Touch [OK]. The radio screen is displayed. • Some of this unit's functions cannot be performed while the vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the parking brake before attempting these operations. Inserting/Ejecting a Disc Adjusting the Volume Adjust the volume by pressing or . Volume decreases/increases continuously by pressing and holding or . Volume: 0 - 35 Lowering Volume Quickly Activating the Audio Mute function will instantly lower the volume level by 20 dB. 1 Press MUTE button to activate the MUTE mode. The audio level will decrease by about 20 dB. 2 Pressing MUTE button again will bring the audio back to its previous level. Top banner and Bottom banner Fade Out Setting When "Top/Bottom Banner Fade Out" is set to "ON," the Top banner and Bottom banner on the Audio/Visual Playback screen fade out after 5 seconds if no operation is performed. To display the keys again, touch the middle of the screen. Top banner Inserting the Disc Insert the disc with the label side facing up. Disc Slot Bottom banner When you insert the disc up to certain point, it is automatically pulled into the unit. The unit starts to play the disc. • Do not touch the surface of the disc directly with your fingers. • Before inserting or removing the disc, always turn the ignition key to ACC or ON. You cannot remove or insert the disc with the ignition key turned to OFF. Removing the Disc Press (Eject button). When the disc has been ejected part way, take it out. If the disc cannot be ejected by pressing , press and hold again for at least 5 seconds. • For details of how to set Top/Bottom Banner Fade Out, refer to "Setting Top banner and Bottom banner Display" (page 31). 15-EN