Alpine INE-W970HD Owners Manual - Page 76

Setting Language This menu allows you to set the language of the system. 1 In the General Settings screen, touch [Language]. ■■ Clearing the security Code 1. Uncheck the [On] box. The password setting screen is displayed. 2. Enter the password you have set and touch [OK]. The password is cleared and the system returns to the General Settings screen then the checkbox of the Security Code is set to "Off". 2 Select the desired language. English / Français / Español Viewing System Info You can view the version information of this product. Make note of this information and refer to it whenever you contact Alpine Tech Support or an Alpine-authorized dealer. In the General Settings screen, touch [System Info]. Setting Security Code You can set the system to be unusable without entering a password. When you turn this setting to "On" and set a password, password input is required when the system is connected to a battery and turned on for the first time. ■■ Setting the security Code 1. Check the [Off] box to turn the feature on and touch [OK]. 2. Enter a password and touch [OK]. • Enter a 6~10 digit number. • Touch [] to delete an entered number. 3. Enter the same pasword again and touch [OK]. The security code is set and the system returns to the General Settings screen, then the checkbox of the Security Code is set to "On". • If you forget a registered password, you can not use this unit. In this case, service will be required. 76-EN