Alpine INE-W970HD Owners Manual - Page 77
Setting Demo Mode, Initializing the System
View all Alpine INE-W970HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Setting Demo Mode This unit has a Demonstration feature for the display. To quit demo mode, set Demo mode to Off. 1 Uncheck the [On] box to turn the feature off. Initializing the System You can initialise all data, to restore the factory settings. Remove the USB flash drive, etc. from the system before operation. 1 In the General Settings screen, touch [Factory Reset]. 2 Check the [Off] box to turn the feature on. To start Demo mode, refrain from operating the system for 30 seconds. Please wait. • If you perform an operation during the Demo mode, the demonstration is temporarily stopped. 2 Touch [Reset] → [Yes]. • Do not turn on/off the power, change the ignition key position or remove the screen panel until system restart is completed. 77-EN