Alpine IVA D105 Owners Manual - Page 28
Other Useful, Features
UPC - 793276200570
View all Alpine IVA D105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Displaying the Disc Status for DVD/Video CD Use the procedure described below to display the status (title number, chapter number, etc.) of the currently playing DVD or of the currently playing Video CD (track number, etc.) on the monitor. 1 During playback, touch the display panel. The operation menu screen is displayed. 2 Touch [CONTROL] within 5 seconds. The display status is displayed for 5 seconds. • Touching an area other than the function guide in the display within 5 seconds, turns off the disc status display. • To play back a DVD-Audio disc, set "VCAP" in "Setting the DVDAudio Playback Mode" (page 33). About DivX® DivX® is a codec (software) program to compress moving images while maintaining image quality using a highly advanced compression ratio and operating speed. • Official DivX® Certified product • Plays all versions of DivX® video (including DivX® 5) with standard playback of DivX® media files • DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license The unit can play back CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/ DVD+RW discs that are recorded in the DivX® mode with extension "avi" or "divx". The optimum size for DivX® disc playback is as follows: Screen Size: 32 to 720 pixel (horizontal) × 32 to 576 pixel (vertical) If an aspect ratio is set other than 720 pixel (horizontal) × 480 pixel (vertical), a black belt may be displayed on the left and right sides, or at the top and bottom of the screen. Image bit rate: "average 4 Mbps, Peak 8 Mbps" Home Theater Profile supported The following audio recording systems are supported. MPEG1 Layer II MPEG1 Layer III MPEG2 Layer III MPEG2.5 Layer III Dolby Digital 64 to 384 kbps 32 to 320 kbps 8 to 160 kbps 8 to 160 kbps 64 to 448 kbps (Max. 5.1ch) Other Useful Features Adjusting the Audio 1 Press SETUP. The SETUP selection screen is displayed. 2 Touch [ ] of AUDIO or press and hold the Rotary encoder for at least 2 seconds on the unit. The display changes to the AUDIO setup screen. Display Example for Audio setup Screen Scrolls the page list up or down. Scrolls the list item by item. Touching and holding will scroll continuously. For details on how to use the BassEngine, refer to "BassEngine Operation" (page 43). When an external audio processor is connected, the "BassEngine" indicator changes to "A.PROCESSOR." For A.PROCESSOR operation, refer to "External Audio Processor" (page 43). • Touching [RETURN] will return to the previous display. • When an external audio processor is connected, BASS, TREBLE or LOUDNESS is not displayed. Adjusting Bass/Treble: You can change the bass or treble frequency emphasis to create your own tonal preference. Touch [ ] to display the Bass or Treble adjusting screen. Setting the Bass Center Frequency: The displayed bass frequency is emphasized Touch [ ] or [ ] of FREQ. to select the desired bass center frequency. Setting range: 60Hz, 80Hz, 100Hz, 200Hz Setting the Bass level: You can emphasize or weaken the bass frequency. Touch [ ] or [ ] of LEVEL to select the desired bass level. Setting range: -7 to +7 26-EN