Alpine IVA D105 Owners Manual - Page 39

Setting the External Device Interrupt Mode If an Alpine Ai-NET Auxiliary Input Adapter (KCA-801B) is connected to the IVA-D105, an Auxiliary Source will be allowed to interrupt the current audio source. For example, you can listen to a portable MP3 player through your car audio system even with a CD changer connected and playing. The CD changer will automatically mute when switched to the AUX Input. For further details on how to use the Alpine KCA-801B, see your authorized Alpine dealer. Setting item: IN INT. MUTE Setting content: OFF / ON OFF: The volume level can be adjusted in Interrupt mode. ON: Sound will not be output. • The auxiliary device being connected must have an Interrupt wire with a negative trigger for this function to operate automatically. Otherwise, a separate switch needs to be added to switch it manually. Setting the Interrupt Icon Display The unit can display the icon of an external device, such as a telephone, whenever a phone call comes in to tell you there is a phone call. Setting item: IN INT. ICON Setting content: INT / TEL INT: The INT icon appears on the display. TEL: When the external device (telephone) sends the interrupt signal, the telephone icon appears on the display. Switching the function of the remote sensor For remote control operation, the remote sensor of the external device (monitor, etc.) can be switched, as you prefer. Setting item: REMOTE SENSOR Setting contents: FRONT / REAR FRONT: REAR: The remote sensor of this unit is effective. The remote sensor of the external monitor connected to AUX OUT of this unit becomes effective. The remote control operates the source connected to the AUX OUT terminals. • The touch panel rear monitor sensor has priority over the remote control sensor. If the rear monitor (connected to the Alpine rear monitor output via the Monitor control lead) is touched, the command is executed regardless of the remote control sensor switch setting. Note, however, that the remote control sensor that has been set takes priority if it has been 5 seconds since last touching the panel. • When an optional DVD changer or DVD player is connected, and the remote control sensor is set to REAR, some soft button operations ( [ ] STOP, etc.) cannot be performed. In this case, set the remote control sensor to FRONT. Setting the Navigation Mode When you connect an optional navigation equipment, set it to ON. Setting item: NAV. IN Setting contents: OFF / ON ON: Navigation source is displayed. OFF: Navigation source is not displayed. The settings related to the navigation can not be changed from this unit. Setting the Navigation Interruption With an Alpine navigation system connected to the IVA-D105, the voice guidance of the navigation system will be mixed with the radio or CD play. Setting item: NAV. MIX Setting content: OFF / ON OFF: The navigation interruption mode is turned off. ON: The navigation interruption mode is on. See "Adjusting NAV. LEVEL:" under "Adjusting the Audio" on page 27 to set the navigation interruption volume level. • The volume level for voice prompts during navigation guidance is set by adjusting the its volume while the prompts are announced. When the announcement finishes, the normal audio volume and the previous audio screen are restored. The voice prompt volume is always at or below the current listening volume. If a navigation announcement cuts in while adjusting the audio level, it always resets to the current level regardless of the audio level setting. • This setting is effective when NAV.IN of SYSTEM list screen is ON. Setting the AUX Mode Setting item: AUX IN Setting content: OFF / ON / VCR / GAME / TV / EXT. DVD / EXTPLYR OFF: AUX source is not displayed. ON: AUX source is displayed. • OFF is not displayed when the optional DVD player or DVD changer is connected. During SYSTEM set up, although the AUX name can be changed, it is not displayed on the SOURCE selection screen. • When OFF is selected, the settings related to AUX cannot be changed from this unit. • The selected name is displayed on the VISUAL and REAR selection screen. • Only when an Alpine TV tuner is connected, you can operate the displayed function guide from this unit. • The selected source name is displayed instead of AUX source name. Select SOURCE to switch to the guide function of each mode. 37-EN