Alpine IVA D105 Owners Manual - Page 46

Adjustment Procedure for Dolby Surround Make the adjustments described below in order to reproduce Dolby Digital and DTS sound with greater accuracy. Adjustment procedure 1 Speaker Setup (page 48) (Turning the speakers to be used on and off and setting their response) 2 Adjusting the speaker levels (page 49) (Adjusting the signal output level to the various speakers) 3 Mixing bass sound to the rear channel (page 49) (Achieving smooth sound in the rear seat by mixing the front audio signals with the rear speaker signals) 4 Adjusting the acoustic image (page 49) (Adjusting the acoustic image to achieve a sound as if the centre speaker were directly in front of the listener) 5 Achieving powerful high volume sound (page 49) (Achieving energetic sound with even greater power, like the sound in a movie theater) 6 Adjusting the DVD Level (page 50) (Adjust the volume (signal level) in the Dolby Digital, Pro Logic II, DTS and PCM modes.) 7 Storing Settings in the Memory (page 50) (Storing all the settings and adjustments made on the IVA-D105 (not only the above settings/adjusts) in the memory) In case of combining the Automatic adjustments, etc. We recommend to make the Automatic adjustments before the Dolby Surround adjustments. 44-EN : the following settings can be made for an external audio processor. Following Steps 1 to 5 describe the common procedures for operating the Audio Processor setting function. For details of the setting function items, refer to descriptions of respective items. 1 Check the Defeat mode is off (page 27), and then touch [SETUP] on the main source screen. The SETUP selection screen is displayed. 2 Touch [ ] of AUDIO. The AUDIO setup screen appears. 3 Touch [ ] of A.PROCESSOR. The A.PROCESSOR list screen appears. 4 Touch [ ] [ ] or [ ] of the desired item to change its setting. Setting items : X-OVER / T.CORR / PHASE / G-EQ / P-EQ / MEDIA XPANDER / BASS SOUND CONT. / DOLBY PLII /REAR FILL / SPEAKER SELECT / MULTI CH SETUP / SPEAKER SETUP / DVD LEVEL / PCM MODE / USER PRESET 5 Touch [RETURN] to return to the previous screen. Setting the Speakers Setting item : SPEAKER SELECT Set the connected speaker by touching the respective [ ] or [ ] button. BassEngine FRONT: REAR: CENTER: SUBW.: A.PROCESSOR FRONT1: FRONT2: REAR: CENTER: SUBW.: ON Fixed OFF/ON OFF/ON OFF/ON OFF/FULL (Full Range)/TW (Tweeter) OFF/ON OFF/ON OFF/ON OFF/MONO/STEREO • Set the speaker which is not connected to OFF. • Settings above can be carried out even when the speaker is set to OFF in "Speaker Setup" (page 48). • To use the subwoofer in MONO with PXA-H700 or PXA-H701 connected, connect the subwoofer to the subwoofer output terminal of PXA-H700 or PXA-H701.