Alpine KCE-350BT Owners Manual - Page 12
Accessories, Installation - bluetooth module
View all Alpine KCE-350BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Accessories Installation Check accessory parts. KCE-350BT Module Power Cable Microphone x 1 x 1 10Pin DIN Cable Velcro Fastener x 1 x 1 Microphone Mounting Brackets Velcro fastener Mounting For the sake of safety, mount the adapter in one of the following locations. • Do not mount the adapter under your feet. Do not step on the adapter, or press excessively on it. • Before mounting the adapter, secure enough space at its upper side to prevent noise or to result in malfunction when sending or receiving data. • Depending on the adapter mounting location noise may occur when using a Bluetooth compatible device, or a malfunction may result when sending or receiving data. In this case, mount the adapter in another location. Attach one side of the Velcro fastener to the box. Remove the backing from the other side of the Velcro strip. Gently press the adapter onto its selected mounting location. x 1 x 1 Velcro fastener Floor Mounting the Microphone For the sake of safety, mount the microphone in the following location. • In a stable and secure location. • In a location that does not inhibit safely driving the vehicle. • Mount the microphone in a location where the driver's voice can easily be picked up. Choose a location for the microphone that can easily pick up the drivers voice. Requiring the driver to move towards the mic for audibility causes a distraction that could be dangerous. Mount the microphone using the supplied Velcro fastener or the bracket. 10-EN