Alpine KCE-350BT Owners Manual - Page 6

Bluetooth SETUP [ The explanations in this Owner's Manual mainly describe the following operations from the AV head unit. Bluetooth Setup Operation The following steps 1 to 5 are common to the various Bluetooth functions. For details, refer to each individual function. • When calling, or selecting the Tel. mode or Bluetooth Audio source, Bluetooth Setup operation cannot be performed. • Refer to the Owner's Manual of the CD Head unit, AV Head Unit or Digital Media Receiver, and set "Bluetooth IN" or "Bluetooth" to ADAPTER, and then perform Bluetooth SETUP operation. 1 Touch [SETUP] on the main source screen. The SETUP selection screen is displayed. 2 Touch [SOURCE] or [ ] of SOURCE. The SOURCE SETUP screen is displayed. 3 Touch [ ] of BLUETOOTH or BLUETOOTH SETUP. The Bluetooth setup is displayed. 4 Touch ON] / [OFF] or [ ] of the desired item to change its setting. Setting items: PAIRED DEVICES / DEVICE SEARCH / CLEAR DEVICE / VISIBLE MODE / AUTO ANSWER 5 Touch [RETURN] to return to the previous screen. Controlling from a CD Head Unit / Digital Media Receiver: 1 Press and hold SETUP for at least 2 seconds. 2 Turn the Rotary encoder or the Center jog dial to select Bluetooth or Bluetooth IN, and press ENT. 3 Turn the Rotary encoder or the Center jog dial to select the desired setting items and press ENT. Setting items: Bluetooth IN ↔ Paired Device* ↔ Visible Mode* ↔ AUTO Answer* ↔ Clear Device* * When "Bluetooth IN" or "Bluetooth" is set to ADAPTER, the above items are displayed. 4 Turn the Rotary encoder or the Center jog dial to change the settings. 5 Press ENT. (Depending on the connected units, this operation may not be necessary.) 6 Press and hold ESC (or SETUP) or BACK for at least 2 seconds. The SETUP mode is canceled. Setting the Bluetooth Device Select one of 5 connected Bluetooth compatible devices that you previously registered (one registered by guest mode*). Setting item: PAIRED DEVICES 1 Select a Bluetooth compatible device to use (change connection) from the PAIRED DEVICE list. 2 Touch [:]. • If the connection is successfully changed, "CONNECTED/ (Device name)" is displayed for 2 seconds, and then the display returns to the SETUP screen. • If you input the wrong passcode or communications fail, "FAILED" is displayed. • If you want to connect another Bluetooth compatible device, after disconnecting the current Bluetooth compatible device, connect the Bluetooth compatible device you want to change to. The PIN code is fixed as "0000." * Guest mode: Use this mode for a temporary pairing. Registration (in guest mode) is canceled once the ignition key goes from ACC to off. Controlling from a CD Head Unit / Digital Media Receiver: 1 Turn the Rotary encoder or the Center jog dial to select a Bluetooth compatible device you want to use (you want to change connection). 2 Press ENT. (Depending on the connected units, this operation may not be necessary.) 4-EN