Alpine i407-WRA-JL Owners Manual English - Page 18
Adjusting the Dimmer of Button Lighting at Night, Date/Clock Setup, Display Off Setting, About iLX-407
View all Alpine i407-WRA-JL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Adjusting the Dimmer of Button Lighting at Night You can adjust the brightness of the button lighting at night with the dimmer. Setting item: Key Illumination Level Setting level: -2 to 2 (Initial setting: 0) • This setting is only available when "Dimmer" is set to [On] or [Auto]. About iLX-407 [About] is selected on the General Setup Menu screen. [About] enables you to check the Serial No., Firmware Version, Model Name, and to initialize various settings. Date/Clock Setup [Date/Clock] is selected on the General Setup Menu screen. You can set the display type of the Date/Clock adjustment and the clock display to 12-hours or 24-hours, depending on your preference. Displaying the Product Information You can view the version information of this product. Make note of this information and refer to it whenever you contact Alpine Tech Support or an Alpine-authorized dealer. Setting item: Version Information Setting contents: Serial No. / SYSTEM version / Firmware Version Setting item: Date/Clock Touch [ ] or [ ] to adjust the day, month, year, hour, minute and AM/PM. • To change to 24-hour, set "24H" to [On] ( ). • To set the daylight saving time (Summer Time mode), set "DST" to [On] ( ). Display Off Setting When [Display Off] is selected on the General Setup Menu screen, the display is turned Off. Setting item: Display Off • To cancel Display Off mode, touch the screen or any button. • Display Off mode is canceled when the power or ACC is turned off. • When the gear lever is shifted to the reverse (R) position and the rear camera is connected, the rear camera image is displayed. • When a call is received on a Bluetooth-connected phone, the incoming call screen is displayed. • You can also activate Display Off mode directly by touching the [Display Off] widget on the HOME screen. Displaying Warranty/Copyright Information Setting item: Warranty/Copyright Information Setting contents: Open source licenses / Notice Initializing the System You can initialize all data, to restore the factory settings. Remove the USB flash drive, etc. from the system before operation. 1 Touch [Restore Factory Setting]. 2 After the confirmation message appears, touch [Yes]. The confirmation screen appears. 3 Touch [Confirm]. The system starts initialization. • Do not turn on/off the power, change the ignition key position or remove the screen panel until system restart is completed. 18-EN