Alpine iLX-F309FRN Installation Manual - Page 6

Factory Unit Disassembly Process Continued

Get Alpine iLX-F309FRN PDF manuals and user guides View all Alpine iLX-F309FRN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

iLX-F309FRN Toyota 4Runner ˜ 6/20 Factory Unit Disassembly Process (Continued) 7 Extract (1) 10mm screw from the A pillar and lift to remove it. 8 Extract (2) 10mm screws from the eyewear compartment and pull down to release it. Disconnect and remove it. 9 Remove drivers side door sill by lifting up. 10 Remove the plastic fastener on the driver's kick panel by turning left. Unsnap and remove the kick panel. 11 Extract (2) 10 mm screws from the lower section of the driver's knee cover panel. 12 Use a panel removal tool to release the clips and remove the driver's knee cover panel.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
Toyota 4Runner
iLX-F309FRN
±
6/20
Factory Unit Disassembly Process (Continued)
7
Extract (1) 10mm screw from the A pillar and lift to
remove it.
9
Remove drivers side door sill by lifting up.
11
Extract (2) 10 mm screws from the lower section of
the driver’s knee cover panel.
8
Extract (2) 10mm screws from the eyewear
compartment and pull down to release it.
Disconnect and remove it.
10
Remove the plastic fastener on the driver’s kick
panel by turning left. Unsnap and remove the kick
panel.
12
Use a panel removal tool to release the clips and
remove the driver’s knee cover panel.