Apple TW020LL/A User Guide - Page 104
Setting the Shutter Speed
UPC - 013803101218
View all Apple TW020LL/A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
102 Setting the Shutter Speed Available Shooting Modes p. 300 When you set the shutter speed, the camera automatically selects an aperture value to match the brightness of the subject. Faster shutter speeds allow you to catch an instantaneous image of a moving subject, while slower speeds create a flowing effect and allow you to shoot without a flash in dark areas. 1 Set the mode dial to . 2 Configure the shutter speed. 1. Use the control dial to change the shutter speed. • When using the control dial, the bar will be displayed and the shutter speed can be bar Shutter speed changed. 3 Shoot. • If the aperture value is shown in red, the image is underexposed (insufficient light) or overexposed (too much light). Use the control dial to adjust the shutter speed until the aperture value shows in white (you can also use Safety Shift (p. 103)). The noise in the recorded image increases at slow shutter speeds. This camera, however, applies special processing to images shot at shutter speeds slower than 1.3 seconds to eliminate the noise, thereby producing high-quality images. (However, a certain amount of processing time may be required before the next image can be shot.)