Apple TW020LL/A User Guide - Page 244
Subject in recorded image is too bright, or image, flashes white., Image contains noise.
UPC - 013803101218
View all Apple TW020LL/A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 244 highlights
242 Subject is too far away for z Shoot within correct flash range of the flash to reach. subject when using the built-in flash (p. 283). z Raise the ISO speed and then shoot (p. 86). Subject in recorded image is too bright, or image flashes white. Subject is too close, making the flash too strong. z Shoot within correct flash range of the subject when using the built-in flash (p. 283). z Adjust [Flash Exp. Comp] or [Flash Output] in the [Flash Control] menu (p. 112). z Set the safety FE to [On] (p. 113). The subject is z Set the exposure compensation to a overexposed because the negative (-) setting (p. 136). surroundings are too dark. z Use the AE lock or spot metering functions (p. 139). Too much light is shining z Change the shooting angle. directly into the camera, or is being reflected off the subject. Flash is set to on). (Flash z Push down the flash to (p. 72). (Flash off) Image contains noise. ISO speed is too high. z Higher ISO speeds and (High ISO Auto) setting may increase image noise. For higher image quality, use as low an ISO speed as possible (p. 86). z In and modes, or , , , and modes in the mode, or when using the Auto ISO Shift, the ISO speed increases and noise can appear.