Asko D5893 User manual Use & Care Guide Asko D5893 EN - Page 33
Installation and connection information
View all Asko D5893 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Installation and connection information DISHWASHER CAVITY MEASUREMENTS H - see table below 6214"0 mm H = 34-1/4" to 36-3/8" H = 870-920 mm 2-4" 50-105 mm Cable hole 1-3/4" 44 mm W = 24" W = 610 mm Make sure the edges of the cable hole are even to avoid damage to the drain and supply hoses and the electric cable. DISHWASHER MEASUREMENTS * 23-3/4" 600mm 34-1/4 to 36-1/8" 870-920mm 28-3/8 to 31-1/2" 720-800mm 520-t1o045" 62140" mm With fill strips** With toe kick (see Steep 7) Without toe kick H minimum ** 34-1/4", 870 mm 34-1/4", 870 mm H maximum 35", 890 mm 36-1/8", 920 mm Without fill strips H minimum *** 33-3/4", 860 mm 33-3/4", 860 mm H maximum 34-5/8", 880 mm 35-3/4", 910 mm * With fill strips and without plastic feet. ** ASKO XLFI dishwashers can be installed either with or without accessory fill strips depending on the type of installation. If the dishwasher cutout has been cut to European widths of 23-5/8" (600 mm), the unit won't require fill strips. If the dishwasher cutout is a standard 24" wide, we have fill strips that make the unit 24" (610 mm) wide. *** Without plastic feet. Customer Care Center 1-800-898-1879 www.askousa.com 33