Asko D5893 User manual Use & Care Guide Asko D5893 EN - Page 40

Adjusting the door springs 4. Adjust the spring tension using one of the following methods depending on how much adjustment is needed. If you need to adjust the spring a lot, place the rear mount in another hole. Place the spring further forward to reduce the tension and further back to increase the tension. If you want to make small adjustments to the spring, hold the back end with one hand and turn the forward mount clockwise or coun terclockwise one or more times. Turn the mount clockwise to increase spring tension and counterclockwise to reduce spring ten sion. Reduce spring tension Increase spring tension Increase spring tension Reduce spring tension 5. Replace the back end of the spring by holding the spring at a right angle to the side of the dishwasher and pushing the end of the spring into the hole, then turning the spring in toward the dishwasher. 6. Reattach the front end of the spring by pulling it up and forward to fasten it in the mount. 7. Open the door and check the spring tension again. If necessary, make further adjustments as above. Stronger door springs are available for purchase for dishwashers fitted with a cover door. Springs are available for various weights and sizes of door. Door springs can be purchased from the retailer who sold you the dishwasher. 5 6 Customer Care Center 40 1-800-898-1879 www.askousa.com