Asko D5893 User manual Use & Care Guide Asko D5893 EN - Page 34

Water Connection, Electrical Connection, Cable/hose Lengths

Get Asko D5893 PDF manuals and user guides View all Asko D5893 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Installation and connection information WATER CONNECTION • The machine can be connected to a cold or hot water supply (maximum 140°F, 85°C). However, we recommend connection to a cold water supply. • The inlet pipe has a connector with either a 9/16" internal thread. ELECTRICAL CONNECTION • 120VAC mains voltage, minimum 15A. DRAINAGE • The supplied cone-shaped connector fits a drain connection with an internal diameter of 1/2, 5/8, 23/32 and 7/8 inches (13, 16, 18 and 22 mm). • Use a hose clamp if connecting to a fixed drain (sink). The connector is ready to cut to the desired drain connection size. Only a clamp is required. CABLE/HOSE LENGTHS Drain hose: Supply hose: Power cable: 59 inches (1930 mm) 64 inches (1670 mm) 45 inches (1770 mm) TOOLS 1) Flathead screwdriver 2) Open-ended wrench 5/8 inches (16 mm) 3) Tape measure 4) Spirit level Customer Care Center 34 1-800-898-1879 www.askousa.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
34
Customer Care Center
1-800-898-1879
www.askousa.com
WATER CONNECTION
• The machine can be connected to a cold or
hot water supply (maximum 140°F, 85°C).
However, we recommend connection to a
cold water supply.
• The inlet pipe has a connector with either a
9/16” internal thread.
ELECTRICAL CONNECTION
• 120VAC mains voltage, minimum 15A.
DRAINAGE
• The supplied cone-shaped connector fits a
drain connection with an internal diameter of
1/2, 5/8, 23/32 and 7/8
inches (13, 16, 18 and
22 mm).
• Use a hose clamp if connecting to a fixed drain
(sink).
The connector is ready to cut to the desired
drain
connection size. Only a clamp is required.
CABLE/HOSE LENGTHS
Drain hose:
59 inches (1930 mm)
Supply hose:
64 inches (1670 mm)
Power cable:
45 inches (1770 mm)
TOOLS
1)
Flathead screwdriver
2)
Open-ended wrench
5/8 inches (16 mm)
3)
Tape measure
4)
Spirit level
Installation and connection information