Asko D5893 User manual Use & Care Guide Asko D5893 EN - Page 35
Step 1. Fitting the dishwasher in place
View all Asko D5893 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Step 1. Fitting the dishwasher in place 1. Loosen the mounting screws on the dishwasher's two front steel feet using a 5/8 inch (16mm) open-ended wrench. Screw the mounting screws down as close to the floor as possible. 2. Adjust the height of the dishwasher by turning the front steel feet with your hands. Leave enough space to adjust them later. 3. Screw in the back foot completely by turning the adjustment screw at the front counterclockwise. Use a flat-bladed or a 1/4 inch nut driver. Customer Care Center 1-800-898-1879 www.askousa.com 35
35
Customer Care Center
1-800-898-1879
www.askousa.com
Step 1. Fitting the dishwasher in place
1. Loosen the mounting screws on the dish-
washer’s two front steel feet using a 5/8 inch
(16mm) open-ended wrench. Screw the
mounting screws down as close to the floor as
possible.
2. Adjust the height of the dishwasher by turn-
ing the front steel feet with your hands. Leave
enough space to adjust them later.
3. Screw in the back foot completely by turning
the adjustment screw at the front counter-
clockwise. Use a flat-bladed or
a 1/4 inch nut
driver.