Asko DC7171 User manual Use & Care Guide ASKO DC7171 EN - Page 19

Final inspection 1. Check that all parts are correctly fitted. If not, go through the steps again. 2. Ensure that all packaging materials have been disposed of. 3. Use a mild dishwashing detergent with warm water and wash the drying cabinet both inside and out. Wipe thoroughly. For further information, see the section "Care" section later in this manual. 4. Insert the power plug. 5. Turn the heat control to "Normal" (full heat) and the time switch to about 20 minutes. Next, press "START". 6. Read the section "Operation", later in this manual. If the drying cabinet does not start, check the following: - That the drying cabinet door is closed. - That the heat control and time switches are activated. - That the "START" button has been fully depressed . - That the drying cabinet is connected to the wall outlet. - That the house breaker has not tripped. 7. When the drying cabinet has been on for five minutes, open the door and check if it is warm inside the cabinet. If the cabinet is not producing heat, even though the heat control is activated and the fan is running, turn the time switch back to "0" and wait 30 minutes. After 30 minutes, try to start the unit by turning the time knob to the desired program time, and the temperature knob to "Normal". Next, press the "Start" button. For further information, see the section "Troubleshooting". Customer Care Center 1-800-898-1879 www.askousa.com 19