Asko DC7171 User manual Use & Care Guide ASKO DC7171 EN - Page 7

Location requirements  If the drying cabinet is to be installed with a connection to exhaust air ventilation, this must be available on the premises.  A grounded electrical outlet must be within 79 in. (2 meters) of the drying cabinet's upper section. A 79-in. (2-meter) grounded power cord with a plug is connected at the top of the drying cabinet. If the electrical outlet is not located as above, the location must be adjusted so that an extension cord is not necessary.  The electrical outlet shall be easily accessible after installation of the drying cabinet. Take this into consideration even in cases when the drying cabinet is built into custom cabinetry or similar framing. For further information, see the section "Electrical requirements".  The floor must be able to support the weight of the cabinet 133 lbs (60 kg).  The floor must be flat with a slope under the cabinet of no more than 1 in. (2.5 cm).  The drying cabinet is only intended for installation indoors and at temperatures above 0°C (32°F).  The drying cabinet may not be located in environments where pressurized water is used for cleaning. Installation dimensions 23 7/16" (59.5 cm) 25 1/4" (64.0 cm) 68 1/8" (173.0 cm) 24" (61.0 cm) Customer Care Center 1-800-898-1879 www.askousa.com 7