Asus AGP-V6600 Deluxe ASUS V6800/V6600 Series Graphic Card English Version Use - Page 42

4. S/W Reference ASUS SmartDoctor 4. Software Reference Advanced Setup When you click the Setup button, the Advanced Setup dialog box appears. The default setting of SmartDoctor is Run once and terminate, which means that SmartDoctor will run every time Windows starts and checks the graphic card's status. If your graphics card is working properly, SmartDoctor will just exit or terminate in 5 seconds. If you want SmartDoctor to continue running in the background and to monitor your graphic card's status, select Run and keep resident. Dynamic Settings will become available when you select Run and keep resident. • Monitoring polling time interval lets you specify the time intervals that SmartDoctor will take to check the graphic chip. The default setting is 5 seconds. You can choose a longer time interval value. SmartDoctor, however, will be less sensitive to graphic chip condition changes. • Enable CPU cooling allows you to enable or disable the CPU cooling option. Enabling CPU cooling option will cool down the CPU's temperature when SmartDoctor detects that CPU is idle. The CPU's temperature will then drop. NOTE: If you have already installed any CPU cooling software in your system, you should just choose only one. Running more than one CPU cooling software at the same time is redundant. After CPU cooling is enabled, and when you run System Monitor in Programs- Accessories-System Tools to monitor CPU usage, you will find that CPU usage has reached its maximum, that is, 100%. Do not be alarmed-this is normal. • Enable dynamic graphic cooling allows you to enable or disable the dynamic graphic cooling option. Enabling the graphic cooling option will cool down the graphic chip's temperature when SmartDoctor detects that the graphic chip is idle. 42 ASUS V6600/V6800 Series User's Manual