Asus AGP-V6600 Deluxe ASUS V6800/V6600 Series Graphic Card English Version Use - Page 63

4. S/W Reference OpenGL VR 4. Software Reference OpenGL VR VR Effect Enable Stereoscopic Mode When selected, this enables you to use the stereoscopic mode when running OpenGL 3D applications AND GAMES. This mode is available only with the ASUS Deluxe models or models with the ASUS VR-100 Optional Upgrade Kit. Eyes Distance between both eyes. Adjust this to bring objects into focus. View Angle The angle by which your two viewing directions intersect. To change this virtual viewing depth, adjust this value. Embossment The effect to make objects virtually pop out of the screen. This is done by setting this field to a high value. When set to a too high value, eye fatigue or discomfort may occur due to focusing problems. To achieve a better stereoscopic visual quality, set Embossment in conjunction with View Angle. Mode Line Interleave Select for better compatibility with most monitors. Stereoscopic visual quality, however, will be poor because only half the number of vertical lines are generated with this mode. Page Flipping Select for the best stereoscopic visual quality. Your monitor must be able to support the high frequency (at least 100Hz) necessary for this mode. Refresh Rate To prevent eye discomfort and fatigue, high refresh rates are preferred. Some monitors, however, may not be able to support a high refresh rate. Make sure that your monitor supports a selected refresh rate; otherwise, your monitor may become unstable, for example, a blank screen may occur. IMPORTANT: Before enabling OpenGL stereoscopic mode and using your stereoscopic or 3D glasses (ASUS VR-100G), make sure that you select a high resolution. The equivalent Stereo Mode resolution of a particular resolution is lower, thus: 16 bits: 2048x1536 → 1024x768 Stereo Mode 32 bits: 1280x960 → 640x480 Stereo Mode 1280x1024 → 640x480 Stereo Mode 1600x900 → 800x600 Stereo Mode 1600x1200 → 800x600 Stereo Mode ASUS V6600/V6800 User's Manual 63