Asus M2N-MX DVI2 User Manual - Page 34
pin CPU_FAN, 3-pin CHA_FAN1
View all Asus M2N-MX DVI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
4. CPU, Chassis, and Power Fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN1) The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors. Only CPU Fan connector supports Q-Fan function. R M2N-MX CPU_FAN GND CPU FAN PWR CPU FAN IN CPU FAN PWM M2N-MX CPU Fan Connector 5. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). Connect the S/PDIF module cable to this connector, then install the module to a slot opening at the back of the system chassis. The S/PDIF module is purchased separately. +5V SPDIFOUT GND R M2N-MX 1-24 M2N-MX Digital Audio Connector SPDIF_O Chapter 1: Product introduction