Asus M2N-MX DVI2 User Manual - Page 62
Jumperfree Configuration
View all Asus M2N-MX DVI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
2.4.6 Jumperfree Configuration Configure System Frequency/Voltage AI Overclocking Chipset Voltage Memory Voltage [Auto] [Auto] [Auto] AI Overclocking [Auto] Allows selection of CPU frequency and auto adjustment of relevant parameters. Frequencies higher than CPU manufacturer recommends are not guaranteed to be stable. If the system becomes unstable, return to the default. Configuration options: [Manual] [Standard] Chipset Voltage [Auto] Allows selection of the chipset voltage. The configuration options vary depending on the CPU installed. Configuration options: [Auto] [1.2V] [1.3V] Memory Voltage [Auto] Allows you to select the memory voltage or set it to auto for safe mode. Configuration options: [Auto] [1.850V] [1.900V] [1.950V] [2.000V] The following items appear only when the AI Tuning item is set to [Manual]. CPU Frequency [200] Displays the frequency sent by the clock generator to the system bus and PCI bus. The value of this item is auto-detected by the BIOS. Use the and keys to adjust the CPU frequency. You can also type the desired CPU frequency using the numeric keypad. The values range from 200 to 230. Refer to the table below for the correct Front Side Bus and CPU FSB/CPU External Frequency Synchronization Front Side Bus FSB 1066 FSB 800 FSB 533 CPU External Frequency 266 MHz 200 MHz 133 MHz 2-24 Chapter 2: BIOS setup