Asus M2N-MX DVI2 User Manual - Page 51
IDE Configuration, Primary IDE Master/Slave
View all Asus M2N-MX DVI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
2.3.4 IDE Configuration The items in this menu allow you to set or change the configurations for the IDE devices installed in the system. Select an item then press if you wish to configure the item. IDE Configuration Onboard IDE Controller [Enabled] Serial-ATA Devices [Device 0/1] nVidia RAID Function [Disabled] Onboard IDE Controller [Enabled] Allows you to enable or disable the onboard IDE controller. Configuration options: [Enabled] [Disabled] Serial-ATA Devices [Device 0/1] Allows you to disable or set the Serial-ATA devices. Configuration options: [Disabled] [Device 0] [Device 0/1] nVidia RAID Function [Disabled] Allows you to enable or disable the NVIDIA RAID function. Configuration options: [Enabled] [Disabled] 2.3.5 Primary IDE Master/Slave While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press to display the IDE device information. Third IDE Master Device : Not Detected Type LBA/Large Mode Block(Multi-sector Transfer) M PIO Mode DMA Mode SMART Monitoring 32Bit Data Transfer [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Enabled] ASUS M2N-MX 2-13