Asus MAXIMUS VIII EXTREME User Guide - Page 134
Wait For 'F1' If Error [Enabled], Boot up NumLock State [Enabled]
View all Asus MAXIMUS VIII EXTREME manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Post Report [5 sec] This item This item allows you to select a desired waiting time of the POST report from 0 to 10 seconds or until is pressed. The following items appears only when you set the Boot Logo Display item to [Full Screen] or [Auto]. Post Delay Time [3 sec] This item This item allows you to select a desired additional POST waiting time to easily enter the BIOS Setup. You can only execute the POST delay time during normal boot. The values range from 0 to 10 seconds. This feature only works when set under normal boot. Boot up NumLock State [Enabled] [Enabled] Set the power-on state of the NumLock to [On]. [Disabled] Set the power-on state of the NumLock to [Off]. Above 4G Decoding [Disabled] This item enables or disables 64-bit capable devices to be decoded in above 4G address space if your system supports 64-bit PCI Decoding. Configuration options: [Enabled] [Disabled] Wait For 'F1' If Error [Enabled] Enable this item for the system to pause until the F1 key is pressed when any error occurs. Configuration options: [Disabled] [Enabled] Option ROM Messages [Enabled] [Enabled] The Option ROM Messages will be shown during the POST. [Disabled] Only the ASUS logo will be shown during the POST. Interrupt 19 Capture [Disabled] [Enabled] Execute the trap right away. [Disabled] Execute the trap during legacy boot. Setup Mode [Advanced Mode] [Advanced Mode] This item allows you to go to Advanced Mode of the BIOS after POST. [EZ Mode] This item allows you to go to EZ Mode of the BIOS after POST. Chapter 3 3-42 Chapter 3: BIOS Setup