Asus P4RD1-MX Motherboard DIY Troubleshooting Guide - Page 24

Memory Configurations

Get Asus P4RD1-MX PDF manuals and user guides View all Asus P4RD1-MX manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

1.7.2 Memory Configurations You may install 64MB, 128MB, 256 MB, 512 MB and 1 GB unbuffered non-ECC DDR DIMMs into the DIMM sockets using the memory configurations in this section. • For dual channel configuration, the total size of memory module(s) installed per channel must be the same (DIMM A1=DIMM B1). • Installing DDR DIMMs other than the recommended configurations may cause memory sizing error or system boot failure. Use any of the recommended configurations in Table 1. • Always install DIMMs with the same CAS latency. For optimum compatibility, it is recommended that you obtain memory modules from the same vendor. • Due to chipset limitation, DIMM modules with double-sided x16 memory chips are not supported in this motherboard. • Visit the ASUS website for the latest DDR 400 MHz (FSB 800/533) Qualified Vendors Lists. Table 1 Recommended memory configurations For dual-channel configuration, the total size of memory module(s) installed per channel must be the same to ensure optimum performance. Channel Channel A Channel B Sockets DIMM_A1 DIMM_B1 1-12 Chapter 1: Product introduction

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
1-12
Chapter 1: Product introduction
1.7.2
Memory Configurations
You may install 64MB, 128MB, 256 MB, 512 MB and 1 GB unbuffered
non-ECC DDR DIMMs into the DIMM sockets using the memory configurations
in this section.
•
For dual channel configuration, the total size of memory module(s)
installed per channel must be the same (DIMM A1=DIMM B1).
•
Installing DDR DIMMs other than the recommended configurations
may cause memory sizing error or system boot failure. Use any of
the recommended configurations in Table 1.
•
Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules
from the same vendor.
•
Due to chipset limitation, DIMM modules with double-sided x16
memory chips are not supported in this motherboard.
•
Visit the ASUS website for the latest DDR 400 MHz (FSB 800/533)
Qualified Vendors Lists.
Table 1 Recommended memory configurations
For dual-channel configuration, the total size of memory module(s) installed
per channel must be the same to ensure optimum performance.
Channel
Sockets
Channel A
DIMM_A1
Channel B
DIMM_B1